Barco RLM W12

35
Brightness
Usetoadjustthebrightnessoftheprojectedimage.Youcanconnecttheprojectortoan
externalimagesourcetodisplayanimageresemblingtheoneshown(PLUGE,PictureLine-
UpGenerationEquipment)foradjustment.AlthoughtherearenumerousversionsofPLUGE
image,theyaretypicallycomprisedofblocksofblack,whiteandgrayontopofablack
background.

Contrast,Brightness,SaturationandTintareinterrelatedoptionsthat
affectoneanother;whenyouadjustoneofthem,youmighthaveto
netuneothersettingstogetthebestprojectionresults.
Above Black
Below Black
Itisrecommendedthatyouadjusttheimagetothe
followingstatus:
•
Thedarkestblackbaroftheimageshould
disappearintothebackground.
•
Thedarkgrayareashouldbebarelyvisible.
•
Thelightgrayareashouldbeclearlyvisible.
•
Thewhiteareashouldappearrealandmellow.
•
Theimageshouldonlydisplayblack,grayand
white(withnoothercolors).
Thefollowingimageillustratestheresultsofdirectbrightnessadjustmentusingarandom
image:

Reducedbrightness Enhancedbrightness

Originalimage
Saturation
Usetoadjustthesaturationoftheprojectedimage.Ifthecoloroftheprojectedimage
seemstobeoverlybrightandvivid,decreasecolorsaturation;ifthecolorseemswhiteand
washedout,increasecolorsaturation.

Reducedsaturation Enhancedsaturation

Originalimage
6
OSD Menu description