Barco RLM W12 - LAYOUT, LAMPS, and ALIGNMENT Settings

41
LAYOUT
Zoom
Duetothefactthatsomeconsumersmaystillbeusingoldertelevisionsystems,someTV
programsmaynotdisplaytheedgesoftheimage.Usethisfunctiontohidetheimageedge
bychoosingoneofthefollowingthreeoptions:
•
Off
 Settingittooffmakesnochangetotheprojectedimage.
•
Crop
 Settingitto"Crop"willaddtwo"masks"equivalentto3%ofhorizontalresolutiononeither
sideoftheimageandtwosimilarmasksaboveandbelowtheprojectedimage.
•
Zoom
 Youcanusethisfunctiontoenlargetheimage'shorizontalresolutionoverthe106%ofthe
defaultaspectratio.Anyportionthatexceedstheoriginalimagewillbecropped.
Whenyousetaspectratioto"Native",besuretosetZoomto"Off"or"Crop".

16:10
Off Crop Zoom
5:4
2.35
Main Select
WhenyouwanttoprojectPIPimage,usethisfunctiontospecifytheimagesourceforthe
PIPimage.ThisfunctionisidenticaltoInputSelection;formoreinformation,pleasereferto"
Page32:InputSelection".
6
OSD Menu description