Barco RLM W12

16
b. PresstheMENUbuttonontheremotecontrolandchooseAlignmentLens
Control;thenusethe▼▲buttonstoadjustthesizeoftheimagethatisprojected
ontothescreen.

Originalimagesize
Zoomout Zoomin


7. Correcting keystoning caused by projection angle
a. Toadjusthorizontalkeystoning,presstheMENUbuttonontheremotecontroland
chooseALIGNMENTWarpKeystoneandusethebuttonsto
▲ ▼
adjust the
image.

b. To adjust vertical keystoning, presstheMENUbuttonontheremotecontroland
chooseALIGNMENTWarpKeystoneandusethe▼▲ buttons to adjust the
image.
  
8. Turning off the projector
Pressthe
STBY
buttonontheprojectororthe buttonontheremotecontrolat
least3secondstoturnofftheprojector.Whentheprojectorhasbeenturnedoff,thecooling
fanwillremaininoperationforapproximately90seconds.
3
Quick installation of the projector