75 of 149
5-1-9. After finishing the firmware upgrade of the Micro-Control board (1
st
part), the firmware
upgrade process of the video board (2
nd
part) will be shown as follows.
5-1-10. Depending on the file size of the firmware, it may take about 12 ~ 25 minutes before the
firmware upgrading can be finished. The following dialog box will be shown after finishing the
firmware upgrade process. Click “OK” button and “Exit” from the menu to exit from the whole
firmware upgrade process.
5-1-11. After finishing the firmware upgrade process, please recycle the AC power.
To Next Page
Loading...
