R5911443 /08 UDM150
Maximum Light output setup via OSD menu
1. In the main menu, select Settings → Maintenance → Flex.
Image 10–59 Maintenance menu, Flex
The Flex license menu is displayed.
Image 10–60 Example of the Flex license menu
2. Choose the desired Light output (in lumens) for which you have a code available.
3. Enter the code via the OSD menu and confirm.
Image 10–61 Example of entering the code in the Flex license menu
10.18 Rigging frame Calibration
How to calibrate the motorized rigging frame
1. In the main menu, select Settings → Maintenance → Frame Calibration.
GUI – System Settings
To Next Page
Loading...
Need help?
General
