R5911443 /08 UDM160
11.3 Advanced Settings – Color
CAUTION: The native colors have been measured and set during factory production. Do not
change them, unless parts of the optical path have been replaced due to servicing.
If you need to change the native colors on the device, make sure to also perform a P7 calibration,
using the Projector Toolset and a chroma meter. For more info on P7 calibration, refer to the
Projector Toolset Reference guide.
How to adjust the P7 native settings
1. In the main menu, navigate to Settings → Maintenance → Advanced, while you are logged in.
Image 11–8 Maintenance menu, Advanced
2. In the Advanced Settings menu, select Native RealColor.
Image 11–9 Advanced Settings, Native Realcolor
The RealColor calibration menu will be displayed.
Image 11–10 Example of the RealColor calibration menu
3. Select the desired value to change and confirm.
4. Change the values to the desired position, taking into account the color gamut values.
5. Select APPLY and confirm.
Advanced Settings
To Next Page
Loading...
Need help?
General
