Barco UDM - Page 173

173R5911443 /08 UDM
Image 13–3
If the top cover do not have “easylocks” for the filter cover (older UDM models), the filter must be
serviced by authorized Barco personnel.
The filter also can be vacuum cleaned from the outside, with less cleaning efficiency.
Removing the top filter
1. Unlock the “easylock”, and flip the filter cover up.
Image 13–4
2. Remove the filter from the projector.
Image 13–5
3. Clean the filter with lukewarm water, and let it dry.
4. Insert the filter, and close and lock the filter cover.
Removing the right side filter
1. Unlock the “easylocks”, and remove the right side cover.
Product maintenance