8. Maintenance
Max. 1 bar
C
D
D
C
E
Image 8-2
4. Remov e the filter ( D).
5. Blow the air in at the specified pressure (m ax 1 bar).
6. Place the filter back on the inside of the cover. Lift the fasteners to insert the filter.
Caution: Pay attention to the airflow direction of the filter (E)
7. Mount the fixed cover and drive in the screws.
8.2 Cleaning the ULC -30A
Overview
Clean external ULC -30A parts with neutral detergents and non - abrasive m aterials.
Do not use aggressive, flammable or toxic detergents.
36
R5905866 ULC-30A 31/01/2018
To Next Page
Loading...
