1. Introduction
1. INTRODUCTION
Overview
• General inform ation
• Identification details
• Notices
1.1 General information
User recommendations
The instructions contained in this m anual are intended for both trained personnel and expe rt operators who are authorized to handle,
install and dismantle the m achine. Information intended for expert operators is provided in the attached docum ents.
Users are not allowed to perform the o perations specified in the attached documents, whereas expe rt operators are authorized to
perform all operations described in the manual.
Aim of the manual
This m anual, written by the m anufacturer, provides operating instructions and criteria for proper installation, operation and mainte-
nance of the machine (trade name specified on the cover).
This m anual is an integral part of the equipment and must be kept for future reference and ma de available to expert operators, for
the entire working life of the machine.
The information contained herein is originally s upplied by the manufacturer in English but may be translated into other languages to
meet legal and or trade requirements. If the m anual is lost or damaged or if it becom es un readable, a copy may be obtained from
the manufacturer, by specifying the m odel and serial number of the eq
uipment. If the machine is sold, the s eller is required to pass
on this manual to the new owner.
1.2 Identification details
Overview
COOLTECH s.r.l.
Via Prampolini 30
Formigine ITALY
VER
QUANTITY [kg] 2.25
VOLTAGE (±10%) [V]
PHASE
NO. OF WIRES
CURRENT [A]
FREQUENCY [Hz]
MODEL
COOLTECH ART.
BARCO PART NUMBER
SERIAL NUMBER
MANUFACT. DATE
REFRIGERANT TYPE R410A,
COOLING LIQUID
UNIT WEIGHT [kg]
DESIGN PRESS. [Bar]
MAX INLET WATER PRESS. [Bar]
MAX PRIMARY OUTLET WATER PRESS.[Bar]
MAX SEC. OUTLET WATER PRESS.[Bar]
INLET PRIMARY WATER TEMP.[° C]
INLET SEC. WATER TEMP.[° C]
MAX CURR. RATING
OF OVERCURR. PROTECT. [A]
MIN. CIRCUIT AMPACITY [A]
COMPRESSOR
CONDENSER FAN MOTOR
MAIN PUMP MOTOR
DMD PUMP MOTOR (opt.)
MADE IN ITALY
A
BC
IH
D
E
F
G
S
V
W
T
U
K
J
L
M
N
OP Q
R
Image 1-1
A Manufacturer’s details M Pressures [bar] and temperatures [°C] of eac h circuit
B Machine mo del N RCM mark Australia
C
Machine version
O WEEE marking co ncerning disposal of electronic equipment
D
Article c ode M anufacturer
P
CE marking of conformity
E Article number Barc o Q UL marking
F Serial number R Mains voltage and electric
al data
G manufacturing date S Electrical pr otection da
ta
R5905866 ULC-30A 31/01/2018
3
To Next Page
Loading...
