Storage, transport and start of operation
13
Instruction Manual PETRO 3003 VOLUTANK Gauging unit BA 140918
● Gauing into an external tank:
The gauging process can only be completed successfully if the contents
are pumped into another chamber or into an external tank because the
contents need to be pumped back into the original chamber to calculate
the pipe volume! In this case, before reaching the minimum dipstick
height, the hose must be switched to a tank from which the contents can
be pumped out again. The available volume must be sufficient to fill the
chamber which is being measured up to 100 mm above the minimum
dipstick level.
The PC has to be prevented from switching to sleep mode:
Windows 7:
Control Panel All Control Panel Items Power Options:
To Next Page
Loading...
