BARTEC BENKE A Series User Manual

Operation of the gauging unit
37
Instruction Manual PETRO 3003 VOLUTANK Gauging unit BA 140918
5.3.4 Special function “pump over“
The special function automatically controls the required valves and the
pump:
Vehicle chambers and external tanks can be connected at the respective
connection (IN, OUT1, OUT2). When vehicle chambers are connected, a
check takes place during the filling process to determine whether the float
gauge is moving and otherwise the pump is stopped.
The filling mode "Pump" requires a setting for both the pump speed and
pump direction. This is not necessary with the filling mode "Bypass".
The pump does not cut out automatically - the operator is required to
switch it off manually!
When the transfer pumping process has started, the relevant information
is displayed and the stop button is enabled:

BARTEC BENKE A Series Specifications

General

Brand	BARTEC BENKE
Model	A Series
Category	Measuring Instruments
Language	English