BARTEC BENKE A Series User Manual

Introduction
1
Instruction Manual PETRO 3003 VOLUTANK Gauging unit BA 140918
1 Introduction
1.1 Information about our customers
documentation
We supply an instruction manual which is a set of operating instructions as
required by the directive on machinery.
The owner and trained servicing personnel must have access to these oper-
ating and maintenance instructions at all times.
These operating and maintenance instructions are intended as an aid to the
user in the following ways:
● To provide an introduction to the gauging unit
● To explain the correct use of the gauging unit
● To enable optimum usage of the gauging unit
Please read this operating and maintenance instruction manual through
carefully.
It contains important information for the following purposes:
● Safe operation of the gauging unit
● Correct operation of the gauging unit
It must be duly heeded to guarantee the following:
● Safety of the operating personnel
● Prevention of dangerous situations (accidents at work)
● Proper operation of the gauging unit
BARTEC BENKE GmbH and its servants shall only be liable in case of pre-
meditation or gross negligence. The extent of liability of such cases is limited
to the amount of the order placed with BARTEC BENKE.
BARTEC BENKE shall not be liable for damages arising from disregard of
the safety instructions and from failure to comply with the operating condi-
tions. No liability shall be accepted for consequential damages.
We,BARTEC BENKE GmbH, Schulstraße 30, D-94239 Gotteszell,hereby
declare, that this product is in compliance with the essential requirements of
the relevant EU-Directives.
The EU-Declaration of conformity for this product can be obtained from
BARTEC BENKE GmbH, Schulstraße 30, D-94239 Gotteszell,
info@bartec-benke.de.
The copyright to this technical documentation is held by BARTEC BENKE
GmbH.
It contains specifications and technical drawings which may not be repro-
duced either in full or in part, distributed, used without authority in order to
compete, or disclosed to others.
Exclusion of liability
Copyright
EU-Declaration of conformity

BARTEC BENKE A Series Specifications

General

Brand	BARTEC BENKE
Model	A Series
Category	Measuring Instruments
Language	English