BARTEC BENKE A Series - 5 Operation of the Gauging Unit; ALI Menu on System 3003

Operation of the gauging unit
30
Instruction Manual PETRO 3003 VOLUTANK Gauging unit BA 140918
5 Operation of the gauging
unit
5.1 “ALI menu” on System 3003
The "ALI menu" application starts automatically when the "gauging unit"
PC software is started on the System3003 connected via the network:
The “ “ button displays the diagnostic page for the dipstick interface:
The dipstick readings can be checked here.
To leave the diagnostics menu press the “STOP” button.