EasyManua.ls Logo

BARTEC BENKE A Series - Qualification of Operating Personnel

BARTEC BENKE A Series
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Introduction
3
Instruction Manual PETRO 3003 VOLUTANK Gauging unit BA 140918
1.3 Qualification of operating personnel
The following skills are required of persons deployed to operate the gauging
unit:
● They must be physically and mentally fit
● They must be in good health
● They must be trained to operate the machine
● They must have proved their aptitude for the job to the owner
● They must be reliable and capable of carrying out the duties assigned to
them
● The gauging unit may only be operated by trained personnel
● The scope of responsibility and the skills required of the personnel
employed at the gauging unit must be clearly set out by the owner of the
gauging unit
● Persons who are in training and who are learning to use the gauging unit
may only work on the gauging unit under the constant supervision of an
experienced person
● Before deploying the personnel, we recommend conducting a health &
safety briefing session and keeping records with staff signatures
confirming their attendance

Table of Contents