47-4 9424200996
BESTCOMSPlus® Software BE1-11m
The BESTCOMSPlus platform window opens. Select New Connection from the Communication pull-down
menu and select BE1-11. See Figure 47-4. The BE1-11 plugin is activated automatically after connecting
to a BE1-11m.
The BE1-11 Connection screen shown in Figure 47-5 appears. Select USB Connection and then click the
Connect button.
The BE1-11 plugin opens indicating that activation was successful. You can now configure the BE1-11m
communication ports and other BE1-11m settings.
Figure 47-4. Communication Pull-Down Menu
Figure 47-5. BE1-11 Connection Screen
Manual Activation of the BE1-11 Plugin
Manual activation of the BE1-11 plugin is required only if your initial use of BESTCOMSPlus will be on a
PC that is not connected to a BE1-11m. Manual activation is described in the following paragraphs.
Requesting an Activation Key
When initially running the BE1-11 plugin, the Activate Device Plugin pop-up appears. You must contact
Basler Electric for an activation key before you can activate the BE1-11 plugin. Click the Email button to
request an activation key from Basler Electric. Once you receive your activation key, click the Activate
button. See Figure 47-6.
To Next Page
Loading...
