Baumer TXG - Page 30

30
2.4.4.3 TriggerOverlapped
This signal is active, as long as the sensor is exposed and read out at the same time.
which means the camera is operated overlapped.
Exposure
Readout
t
exposure(n)
t
readout(n+1)
t
readout(n)
t
exposure(n+1)
Trigger
Trigger
Overlapped
Once a valid trigger signal occures not within a readout, the "TriggerOverlapped" signal
changes to state low.
2.4.4.4 ReadoutActive
While the sensor is read out, the camera signals this by means of "ReadoutActive".
Exposure
Readout
t
exposure(n)
t
readout(n+1)
t
readout(n)
t
exposure(n+1)
Trigger
Readout
Active