Baumuller b maXX BM4 Series Compact Manual

Troubleshooting
Compact manual b maXX
®
BM4400, BM4600, BM4700
Document no.: 5.06014.02 Baumüller Nürnberg GmbH
64
of 94
8.2
8.2.1 Reset errors
If the red error LED is lighting up, there is at least one error. You can react upon this, by
’Quit’ the error in WinBASS II / ProDrive, that means, that you inform the device, that you
have noted the error, that you have removed it or that you want to pass over it. Due to
error reset all error messages are reset. An individual error reset is not possible. The ac
-
ceptance causes a resetting of the error, in case the reset was possible due to the error
situation.
8.2.2 Error parameters - error messages (error list) - error reactions
In the following you will find all error messages. An (error) message is shown in
WinBASS
II in the window ’drive manager’. In the list field ’messages’ you will find the (ab-
breviated) error names, at HIPERFACE
®
errors also the device part, the error number
(not at errors according to HIPERFACE
®
specification) and, separated by a colon, the
meaning of this error, e.g. ’MotorError 96: Short-circuit temperature sensor’. At HIPER
-
FACE
®
errors e.g. ’Encoder 1 communication: Parity error’.
Error processor P0201
Error no. Meaning Reaction Troubleshooting
0 reserved
1 Watchdog-Error IS Execute a restart of b maXX
®
4400
2 Incorrect or unexpected interrupt has
occurred
IS Execute a restart of b maXX
®
4400
3 NMI interrupt/bus error IS Execute a restart of b maXX
®
4400
4 to 15 reserved
not assigned = 0

Baumuller b maXX BM4 Series Specifications

General

Brand	Baumuller
Model	b maXX BM4 Series
Category	DC Drives
Language	English