Baumuller b maXX BM4 Series User Manual (English)

Other manuals for Baumuller b maXX BM4 Series

Operating Handbook82 pages

Instruction104 pages

Questions and Answers:

W
whiteheadrobertAug 11, 2025
What to do if the red error LED is lighting up on Baumuller Control Unit?
- J
  Jennifer BlankenshipAug 11, 2025
  If the red error LED is illuminated, it indicates an error. You can address this in several ways: * Using ProDrive (from FW 3.07), click the “Quit errors” button in the “Device manager” dialog box or on the “Device manager” page to acknowledge and address the error. * By writing access to control word (P0300), generate a rising edge in bit 7. * Configure a digital input of a DIO module via parameter P0575 for error reset. * Use the pulse enable input, assuming the drive is controlled solely via hardware inputs.
J
jonathan15Aug 15, 2025
How to start the motor on Baumuller Control Unit if the red LED H4 isn’t lighting up and the LED H2 is green?
- S
  Stephanie HarringtonAug 15, 2025
  If the motor doesn't start, but the red LED H4 is off and the LED H2 is green, check the parameterization of the b maXX 4000 using the parameter list in ProDrive. Possible errors include a torque limit set to 0 or an incorrect notch position.
S
Susan HodgesAug 21, 2025
What to do if no LEDs are lighting up on the front side of the Baumuller Control Unit?
- S
  sethcollinsAug 21, 2025
  If no LEDs are lit on the front of the device, verify the 24V supply.
B
brian40Aug 26, 2025
What to do if Baumuller DC Drives show Watchdog-Error?
- A
  Adam JonesAug 26, 2025
  If you encounter a Watchdog-Error with your Baumuller DC Drives, execute a restart of b maXX® 4400.
J
joeandersonAug 30, 2025
What to do if an incorrect interrupt has occurred in Baumuller DC Drives?
- V
  vegamichelleAug 30, 2025
  If an incorrect or unexpected interrupt has occurred with your Baumuller DC Drives, execute a restart of b maXX® 4400.
R
Robert WilsonSep 4, 2025
What to do if NMI interrupt or bus error appear in Baumuller DC Drives?
- R
  rebecca50Sep 4, 2025
  If you are experiencing an NMI interrupt or bus error with your Baumuller DC Drives, execute a restart of b maXX® 4400.

Baumuller b maXX BM4 Series Specifications

General

Series	b maXX BM4
Type	DC Drives
Enclosure Rating	IP20
Communication	CANopen
Protection Features	Overcurrent, overtemperature, short circuit
Relative Humidity	Up to 95% (non-condensing)
Cooling	Air or liquid cooling

Related product manuals

Baumuller b maxx BM4400

82 pages

Baumuller b maXX BM1000

176 pages

Baumuller b maXX BM4 Series Instruction Handbook

Table of Contents

Other manuals for Baumuller b maXX BM4 Series

Questions and Answers:

Baumuller b maXX BM4 Series Specifications

Related product manuals