Baumuller b maXX BM4 Series - Configuration, Parameter List

Commissioning/Operation
Instruction handbook b maXX (BM4-F-)AIO-XX (Analog IO module)
Document No.: 5.01045.08
59
of 82
8
6 Click on l for opening the parameter list.
7 Click on the + -symbol before „Configuration IO analog“ in the window „Parameter-
list“. The corresponding parameters of the Analog IO module are displayed.
Figure 23: Configuration, parameter list
NOTE!
The error parameters of the Analog-IO-Modules can be found in the chapter ZError
messages– from page 69.