Baumuller b maXX BM4 Series Instruction Handbook

Assembly
Instruction handbook b maXX (BM4-F-)AIO-XX (Analog IO module)
Document No.: 5.01045.08 Baumüller Nürnberg GmbH
34
of 82
6.2
6.2 Assembly
1 Switch off the b maXX BM4000 and assure it against unintentional switching on during
mounting.
2 Pull off the design cover towards the front from the controller unit
3 Look at the controller unit for the provided slot
Figure 6: Mounting
WARNING!
Danger as a result of faulty mounting!
The mounting requires qualified personnel with adequate experience. Faulty mount-
ing can lead to life-threatening situations or substantial material damage.
Therefore:
m Only allow mounting to be performed by employees of the manufacturer or by oth-
er qualified personnel.
DANGER!
Risk of fatal injury from electrical current!
There is an immediate risk of fatal injury if live electrical parts are contacted.
Therefore:
m Switch off the current when any kind of work is being performed on the electrical
system and ensure safety before switching on again.
m Pay attention to the relevant safety instructions when handling electrical equip-
ment carrying high voltages.
m Do not touch electrically live parts before taking into account the discharge time of
the capacitors

Baumuller b maXX BM4 Series Specifications

General

Brand	Baumuller
Model	b maXX BM4 Series
Category	DC Drives
Language	English