Baumuller b maXX BM4 Series Instruction Handbook

37
of 82
Instruction handbook b maXX (BM4-F-)AIO-XX (Analog IO module)
Document No.: 5.01045.08
7INSTALLATION
In this chapter we describe the electrical installation of the AIO-XX or BM4-F-AIO-XX.
The mechanical mounting is described in
ZMounting– from page 33 and not necessary
for BM4400, BM4600 and BM4700 with ES controller.
7.1 Safety notes
DANGER!
Risk of fatal injury from electrical current!
There is an immediate risk of fatal injury if live electrical parts are contacted.
Therefore:
m Switch off the current when any kind of work is being performed on the electrical
system and ensure safety before switching on again.
m Pay attention to the relevant safety instructions when handling electrical equip-
ment carrying high voltages.
m Do not touch electrically live parts before taking into account the discharge time of
the capacitors
WARNING!
Danger because of faulty installation and initial commissioning!
Installation and commissioning require qualified personnel with adequate experi-
ence. An installation fault can cause danger situations or large damage of property.
Therefore:
m Only personnel from manufacturer or qualified personnel operate while installation
and initial commissioning

Baumuller b maXX BM4 Series Specifications

General

Brand	Baumuller
Model	b maXX BM4 Series
Category	DC Drives
Language	English