Baumuller b maXX BM4 Series Compact Manual

Troubleshooting
Compact manual b maXX
®
BM4400, BM4600, BM4700
Document no.: 5.06014.02 Baumüller Nürnberg GmbH
70
of 94
8.2
Error Encoder1 P0208
Error no. Meaning Reaction Troubleshooting
112 Communication error
(HIPERFACE
®
-Specification)
IS see encoder 1 (HIPERFACE
®
P0234
(= 3rd level)
113 reserved
114 Error at overwriting of
encoder position information
IS Execute the command again. If the error occurs
again, contact Baumüller Nürnberg GmbH.
115 Cable break encoder 1 IS Remove the cable break in the encoder cable
of encoder 1 or check the assignment of the
encoder cable
116 Overspeed encoder 1 IS Check the allowable rotational speed for
encoder 1
117 Amplitude limit exceeded IS Use another encoder
118 Encoder type unknown IS Check if the correct encoder is connected or
use another encoder
119 Invalid data field for motor data IS Use another encoder
120 Incorrect motor data IS Use another encoder
121 Saving error of motor data IS Use another encoder
122 Motor data write-protected.
(is not valid for BM motors)
IS Use another encoder
123 Field angle error IS Check the shielding of the encoder cable
124 Encoder without temperature measur-
ing
adjustable Use an encoder module with temperature mea-
suring
125 Memory capacity in the encoder for
electronic type plate too small
adjustable Use another encoder with a greater memory
126 to 127 reserved
not assigned = 0

Baumuller b maXX BM4 Series Specifications

General

Brand	Baumuller
Model	b maXX BM4 Series
Category	DC Drives
Language	English