Baumuller b maXX BM4 Series Compact Manual

Error detection and troubleshooting
Compact manual b maXX
®
BM4400, BM4600, BM4700
Document no.: 5.06014.02
71
of 94
8
Error encoder 2 P0209
Error no. Meaning Reaction Troubleshooting
128 Communication error
(HIPERFACE
®
-Specification)
IS see encoder 2 (HIPERFACE
®
) P0235
(= 3rd level)
129 reserved
130 Error at overwriting of
Encoder position information
IS Execute the command again. If the error occurs
again, contact Baumüller Nürnberg GmbH.
131 Cable break encoder 2 IS Remove the cable break in the encoder cable
of encoder 1 or check the assignment of the
encoder cable
132 Overspeed encoder 2 IS Check the allowable rotational speed for
encoder 2
133 Amplitude limit exceeded IS Use another encoder
134 Encoder type unknown IS Check if the correct encoder is connected or
use another encoder
135 Invalid data field for motor data IS Use another encoder
136 Incorrect motor data IS Use another encoder
137 Saving error of motor data IS Use another encoder
138 Motor data write-protected.
(is not valid for BM motors)
IS Use another encoder
139 Field angle error IS Check the shielding of the encoder cable
140 Encoder without temperature measur-
ing
adjustable Use an encoder module with temperature mea-
suring
141 Memory capacity in the encoder for
electronic type plate too small
adjustable Use another encoder with a greater memory
142 to 143 reserved
not assigned = 0

Baumuller b maXX BM4 Series Specifications

General

Brand	Baumuller
Model	b maXX BM4 Series
Category	DC Drives
Language	English