Operation
EL6910 57Version: 1.4.1
Note
User name and password are case-sensitive
Pay attention to upper/lower case characters for the user name and password.
The standard user is Administrator, the standard password is TwinSAFE.
Attention
Power supply during download
Please assure that the power supply for the TwinSAFE logic is not switch off during down-
load. This can cause unexpected behavior or shut down the TwinSAFE Logic permanently.
Fig.64: Download Project Data – The Login dialog
In the Download Project Data dialog specify the user name, the serial number of the EL6910/EJ6910 or
EK1960 onto which the project is to be loaded, and the user password. The default user name is
Administrator, the default-password is TwinSAFE. Use the Next button to move to the next dialog.
Fig.65: Download Project Data – The Select Project Data dialog
In the Select Project Data dialog select Complete Project Data to load the whole project onto the EL6910/
EJ6910 or EK1960. Use the Next button to move to the next dialog.
To Next Page
Loading...
