© BEKA 201 All rights reserved!6
...a product of BEKA
12. Shutdown
· Relief the central lubrication pump from pressure!
· Shut down current!
· Separation of central lubrication pump from current supply must be done by a professional electrican.
· Remove all pipes and hoses from the device and loosen all fastenings for the demounting.
13. Disposal
When changing lubricant, observe the disposal details of the lubricant manufacturer!
Lubricants or cloth contaminated with lubricant or similar textiles must be collected in a
specially marked receptacle and disposed accordingly.
The disposal must be done professional and according to the national and international
laws and regulations.
Moreover, BEKA devices could contain batteries. Professional and properly disposed
batteries will be recycled. The contain important raw materials.
Note!
43
To Next Page
Loading...
