TM 55-1520-228-BD
ASSESSING BATTLEFIELD DAMAGE
d.
General aircraft assessment charts,
Table 2-1, guide you through the air-
craft’s capability so that all the
necessary capabilities are evaluated.
If a fault is found, Table 2-1 directs
you to the chapter for the functional
group which contains the fault. The
BDAR assessment procedure will refer you
to a guide fix in this manual, a stan-
dard TM 55-1520-228-23 repair if it is
feasible, or a higher AVIM level of
repair if extent of damage, time con-
straint, tooling requirements, repair
part or material,
and any other necessary
requirements are only available at a
higher level of maintenance.
Section II.
GENERAL FAULT ASSESSMENT TABLE
2-2. GENERAL FAULT ASSESSMENT TABLE.
Refer to Table 2-2 for assessment logic flow
chart.
Table 2-2.
General Assessment
2-3
To Next Page
Loading...
