7
TGH1361en/11.2009
1. Safety information
1.1 Use for the intended purpose
The A-ISOMETER® is intended for:
z monitoring the insulation resistance of IT systems
Any other use, or any use which goes beyond the foregoing, is deemed to
be use other than for the intended purpose. The BENDER companies shall
not be liable for any losses or damage arising therefrom.
Use for the intended purpose also includes
z compliance with all information in the operating instructions, and
z compliance with test intervals.
As a basic principle, our "General conditions of Sale and Delivery" shall ap-
ply. At the latest, these shall be available to the operator when the contract
is concluded.
1.2 Warranty and liability
Warranty and liability claims in cases of damage to persons and property
shall be excluded if they are attributable to one or more of the following
causes:
z Use of the A-ISOMETER® other than for the intended purpose
z Incorrect assembly or installation, commissioning, operation and mainte-
nance of
the A-ISOMETER®.
z Failure to comply with the information in the operating instructions regarding
transport, commissioning, operation and maintenance of the A-ISOMETER®.
z Unauthorized structural modifications to the A-ISOMETER®.
z Failure to comply with the technical data
z Improperly executed repairs, and the use spare parts or accessories which are
not recommended by the manufacturer.
z Cases of disaster and force majeure
z Assembly and installation with device combinations not recommended.
To Next Page
Loading...
Need help?
General
