Safety information
9
TGH1361en/11.2009
1.2.4 Inspection, transport and storage
Inspect the dispatch packaging and equipment packaging for damage, and
compare the contents of the package with the delivery documents. In the
event of damage in transit, please inform the BENDER company immediate-
ly.
The devices must only be stored in areas protected from dust, damp and
spray or dripping water, and in which the specified storage temperatures are
maintained.
1.2.5 Note
Make sure that the operating voltage is correct!
Prior to insulation and voltage tests, the A-ISOMETER® must be disconnected
from the power system for the duration of these tests.
In order to check the proper connection of the device, it is recommended to
carry out a functional test.
Make sure that the basic settings meet the requirements of the system.
Children and unauthorized persons must not have access to or contact with
the A-ISOMETER®.
1.3 Explanations of symbols and warnings
The following symbols are used in BENDER documentation to draw atten-
tion to important information and to make it easier to find certain text pas-
sages. The following examples explain the meaning of the symbols:
The "Attention" symbol is used to draw attention to information
warning employees of hazardous situations.
Information you should know for correct handling of the product is
marked with the "Info" symbol.
To Next Page
Loading...
Need help?
General
