Benning IT 115 - Low-Impedance Resistance; Continuity Test; Low-Impedance Resistance R LOW; Continuity Test

BENNING IT 115 Technical data
- 54 -
7.2 Low-impedance resistance / continuity test
7.2.1 Low-impedance resistance R LOW
Measuring range according to EN 61557-4: 0.16   1999 
Measuring range R (

) Resolution (

)
Accuracy
0.00  19.99
0.01
(3 % of the measured value + 3 digits)
20.0  199.9
0.1
(5 % of the measured value)
200  1999
1
Measuring range R+, R- (

) Resolution (

)
Accuracy
0.0  199.9
0.1
 (5 % of the measured value + 5 digits)
200  1999
1
Open-circuit voltage ............................... 6.5 V DC  9 V DC
Measuring current ................................... min. 200 mA for a load resistance of 2 
Test cable compensation ........................ up to 5 
Number of possible tests ........................ > 2000, with fully charged batteries / storage batteries
Automatic polarity reversal of the testing voltage.
7.2.2 Continuity test
Measuring range (

) Resolution (

)
Accuracy
0.0  19.9
0.1
(5 % of the measured value + 3 digits)
20  1999
1
Open-circuit voltage ............................... 6.5 V DC  9 V DC
Short-circuit current ................................ max. 8.5 mA
Test cable compensation ........................ up to 5 