BenQ IL430 - Page 73

73 Troubleshooting
Touch vendor Stylus dimensions Accuracy Applicable models
NextWindow < 47" diameter: Ø6,
65": Ø9
± 3mm ≤ 55"
5mm > 55"
T420/T650/TL550/TL650/
RP650/RP650+
Nexio 42"/45"/55": Ø8 ± 2.5mm IL420/IL460
IRTouch 65" diameter: Ø8 ± 1.5mm in center,
± 2.5mm near
border
IL650/RM650
CVTTouch 6mm for single touch
8mm for multi touch
+/-2.0mm (Over
90% of touchable
area)
RP551/RP651/RP700/RP701/
RP552/RP652/RP702/RP705/
RP790/RP840G/RP553K/
RP653K/RP654K/RP704K/
RP750K/RP860K/RP860S/
IL430/IL490/IL550
IST U 3mm for single touch
6mm for multi touch
+/-1.0mm (over
90% of touchable
area)
RM5501K/RM6501K/
RM7501K/RM8601K
IST X 2mm for single touch
5mm for multi touch
+/-1.0mm (over
90% of touchable
area)
RP6501K/RP7501K/RP8601/
RM5502K/RM6502K/
RM7502K/RM8602K
CVTE P-Cap 6mm for passive
2mm for active
+/- 1.5mm (over
90% of touchable
area)
CP6501K/CP8601K
IRTouch HE
series
>2mm +/- 1mm (over 90%
of touchable area)
RP6502, RP7502, RP8602
IRTouch MD
series
>3mm +/- 1mm (over 90%
of touchable area)
RE6502, RE7502, RE8602
IST F series >3mm +/- 2mm (90%
active area located
in middle)
RM6052S, RM7502S,
RM8602S
Annax P-cap >8mm +/- 3mm BH2401T, BH3501T
IRTouch HE-6
series
>2mm +/- 1mm (90%
active area located
in middle)
RM6503, RM7503, RM8603
KTC T50
series
>2mm +/- 1mm (90%
active area located
in middle)
IL4301, IL5501