USER HANDBOOK 2.0 | DC20XX, ET20XX, ECC21XX SLIM
Berghof Automation GmbH | Harretstrasse 1 | 72800 Eningen | www.berghof.com
Dialog-Controller-DC20XX_EN.docx
11th In order to activate all of the modified settings, reboot the device:
Disconnect the device temporarily from the power supply
– or –
Click on “Reboot” in the web interface and then confirm on the next screen by clicking on “Reboot
Module”.
The device is now configured and ready for use.
To Next Page
Loading...
