BestCode NExT 86 - Page 175

BestCode Next Series 8 Technical Manual October 2022 Page 161 of 290
Prompt Code
Prompt Name
Prompt Description
02-0002
NO PROMPT
"Fan speed increased to %d."
Reports Increase in Fan speed Fan in Percentage (30%-100%) to the Event Log. Occurs when machine
temperature increases over a specific temperature threshold.
Prompt Code
Prompt Name
Prompt Description
02-0003
NO PROMPT
"Fan speed decreased to %d."
Reports decrease in Fan speed Fan in Percentage (30%-100%) to the Event Log. Occurs when machine
temperature decreases below a specific temperature threshold.
Prompt Code
Prompt Name
Prompt Description
02-0004
NO PROMPT
"Fan speed is at minimum."
Occurs when machine temperature decreases below a specific temperature threshold and fan is
already at the minimum speed.
Prompt Code
Prompt Name
Prompt Description
02-0005
NO PROMPT
"Fan speed is at maximum."
Occurs when machine temperature increases above a specific temperature threshold and fan is
already at the maximum speed.
Prompt Codes
Prompt Name
Prompt Description
02-0006
02-0007
02-0008
NO PROMPT
"Fan speed setting is disabled."
Occurs when system is in “Air Cooling” Cooling Method.
Prompt Code
Prompt Name
Prompt Description
02-0009
NO PROMPT
"Fan Speed %d%%, Cabinet Temp. %dC"
Reports to the Event Log the Fan % and Temperature.
Prompt Code
Prompt Name
Prompt Description
02-000A
Not Used
Not Used
Solution 1:
Update Firmware version.
Prompt Code
Prompt Name
Prompt Description
02-000B
NO PROMPT
"System date changed."
Written to the event log to indicate that the date has been changed.
Prompt Code
Prompt Name
Prompt Description
02-000C
NO PROMPT
"System time changed."
Written to the event log to indicate that the time has been changed.
Prompt Code
Prompt Name
Prompt Description
02-000D
Not Used
Not Used
Update Firmware Version