Beta EVO 2T Handbook

2
OPERATION
26
GB
STARTUP
Set the fuel tank tap to ON or RES (see
page 20).
- Check that the gears are in neutral (page
22).
- Pull the clutch lever (page 21).
KICKSTART (page 22):
depress the kick-starter with a sharp move-
ment of the foot
ATTENTION
Once the pedal has been depressed,
release it immediately. This avoids jolts to
the entire ignition group and to the foot.
COLD STARTING:
actuate the starter by pulling it upwards
(page 20), start the engine, wait a few
seconds, then return the lever to its original
position.
ENGINE SHUT-DOWN
To shut-down the engine:
- press the button on the left switch unit
(see page 21) .
NOTE:
With the engine stopped, always set the
fuel tap to OFF (page 20).

Beta EVO 2T Specifications

General

Displacement	249 cc
Cooling System	Liquid cooled
Transmission	6-speed
Bore x Stroke	66.4 mm x 72 mm
Clutch	Wet multi-disc
Dry Weight	67 kg
Engine Type	2-stroke single
Front Suspension	Telescopic fork
Rear Suspension	Monoshock
Front Brake	Single disc
Rear Brake	Single disc
Fuel Capacity	2.5 liters
Frame	Aluminum