EasyManuals Logo

Beta EVO 2T Handbook

Beta EVO 2T
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #59 background imageLoading...
Page #59 background image
4
CHECKS AND MAINTENANCE
59
GB
PROLONGED INACTIVITY
A few simple operations should be performed to keep the vehicle in good condition
whenever it is to remain inactive for a long period (e.g. during the winter):
Thoroughly clean the vehicle.
Reduce the tyre pressures by approximately 30 percent, and if possible raise the
tyres off the ground.
Remove the spark plug and pour a few drops of engine oil into the spark plug hole.
Make the engine turn a few times by operating the kick-start (where available) and
then replace the spark plug.
Cover the unpainted parts, excepting the brakes and the rubber parts, with a fi lm
of oil or spray silicone.
Protect the vehicle with a dust cover.
Drain the carburetor tank as described at page 41.
AFTER PROLONGED INACTIVITY
Restore the tyre infl ating pressures.
Check the tightening of all the screws having an important mechanical function.

Table of Contents

Other manuals for Beta EVO 2T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Beta EVO 2T and is the answer not in the manual?

Beta EVO 2T Specifications

General IconGeneral
Displacement249 cc
Cooling SystemLiquid cooled
Transmission6-speed
Bore x Stroke66.4 mm x 72 mm
ClutchWet multi-disc
Dry Weight67 kg
Engine Type2-stroke single
Front SuspensionTelescopic fork
Rear SuspensionMonoshock
Front BrakeSingle disc
Rear BrakeSingle disc
Fuel Capacity2.5 liters
FrameAluminum

Related product manuals