Beta EVO 2T Handbook

4
CHECKS AND MAINTENANCE
43
GB
FRONT BRAKE
CHECK THE LEVEL OF THE FRONT
BRAKE FLUID
Check the level of the brake fl uid through
sight A. The level of the fl uid should never
fall below the mark in the sight.
RESTORING THE LEVEL OF THE
FRONT BRAKE FLUID
To restore the level of the brake fl uid, loosen
the two screws 1, lift cap 2 and add brake
fl uid until its level is 5 mm below the upper
rim of the reservoir.
Use the liquid indicated on page 18 in
the “Recommended lubricants and liquids”
table.
WARNING:
The brake fl uid is extremely corrosive. Take
care not to spill it on the paintwork.
1
2
A

Beta EVO 2T Specifications

General

Displacement	249 cc
Cooling System	Liquid cooled
Transmission	6-speed
Bore x Stroke	66.4 mm x 72 mm
Clutch	Wet multi-disc
Dry Weight	67 kg
Engine Type	2-stroke single
Front Suspension	Telescopic fork
Rear Suspension	Monoshock
Front Brake	Single disc
Rear Brake	Single disc
Fuel Capacity	2.5 liters
Frame	Aluminum