MCS-D 200 – Menu
33
3.3.7.1 ID List
You may assign an ID to individual devices. Also refer to chapter 3.3.7.2 “Set IDs” to find out how you can set IDs for all microphone
stations.
Scroll to the “GROUP” line. Use the right or left hand navigator button if you want to change the group number.
Note:
In the stand-alone mode (if you do not use the iCNS software) all microphone stations are assigned to the same session, no matter to
which group they belong. An assignment to groups is only possible in the MultiSession mode when using the iCNS software.
Now use the down navigator button to go to the “DEVICE ID” line. The LED ring of the selected microphone station will illuminate
(here: microphone station 1 out of 50).
Use the right or left hand navigator button to assign a DEVICE ID number (1 to 2000). If you select an ID number which has been already
assigned, hash will be diplayed. In this case select a different number to avoid conflicts. Microphone stations of different groups can have
the same ID; for example the microphone stations of group 1 have the IDs 0001 to 0200 and the microphone stations of group 2 have the
IDs 0001 to 0150.
Select the next microphone station, and so on.
Use the up or down navigator button for scrolling
press the ENTER button
Group number
Device Identification number (ID)
Hash indicates that the ID number has been
already assigned to another device. Select a
different number!
Press the SET ID button if the device has the
desired number.
Use the right or left hand navigator button to
edit the number
To Next Page
Loading...
