MCS-D 200 – Safety Information
6
Thank you for selecting the digital multimedia-based MCS-D 200 conference system from beyerdynamic. Please take some time to read
carefully through this manual before setting up the equipment.
This manual describes the installation and operation of the MCS-D 200 system without the control and configuration via PC.
MCS-D 200 is a fully digital multimedia-based conference system in single-cable design. It can be used for small and large events in
permanent installations or for mobile use.
The system includes the following components:
• MCS-D 200 Control Unit
• MCS-D 202 Interpreter Stations
• MCS-D 3121 Delegate Station and MCS-D 3123 Chairman Station
• MCS-D 3171 Delegate Station and MCS-D 3173 Chairman Station
• Cabling via “NetRateBus”
The NetRateBus is a special kind of cabling which allows operating all services such as microphone channels, interpreting channels, control,
network, telephone and safety precautions simultaneously on 54 channels without any interferences.
The NetRateBus allows different types of cabling such as in a daisy chain, star or tree structure with any branch. The setup is clear and
simple.
One conference system can consist of a maximum 1,000 microphone units with optimal conditions.
For the digital interpreter stations there is no additional control unit needed.
Third party devices such as PCs, automatic cameras with pan, tilt, zoom, recording devices, output devices or display screen in the hall can
be connected.
With the MultiSession Management several meetings can be controlled simultanously with one control unit and the software. The individual
conference rooms can be combined to one large group or conference room by changing the software settings accordingly.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit
from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
Exemption from liability
• beyerdynamic GmbH & Co. KG will not be liable if any damage, injury or accident occurs due to negligent, incorrect or inappropriate
operation of the product.
Location
• The equipment must be set up so that the mains switch, mains plug and all connection on the rear of the device are easily accessible.
• If you transport the equipment to another location take care to ensure that it is adequately secured and can never be damaged by
being dropped or by impacts on the equipment.
1. Important Safety Instructions – Control Unit and Power Supply Unit
The lightning flash within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage
within the device that may be sufficient enough to constitute a risk of electric shock to users.
The exclamation mark within an equilateral triangle is intended to alert the user to the presence of important operating and
maintenance instructions in the literature accompanying the product.
To Next Page
Loading...
