MCS-D 200 – Menu
26
3.3.4.5 O-tone Cluster
In the O-TONE CLUSTER menu you can activate a cluster channel. The signal is not directly routed to the loudspeaker of the microphone
unit, but e.g. via a DAI ditigal/analogue interface.
When using a cluster the “Clust” channel will automatically be entered (or removed) in “Define Channels” and “Channel List” and is
available at the DAI Channels In/Out.
press the ENTER button
Press the SET button to
store the setting.
Use the up or down navigator button to scroll
through the menu
The arrow identifies the current line.
The star identifies the selected function.
To Next Page
Loading...
