BIFFI F02 User Manual

10
© Copyright by BIFFI Italia. All rights reserved.
A !@#$ INTERNATIONAL LTD. COMPANY
F02 Quarter-turn Electric Actuators
instruction and operating manual
- in very humid environments, a moisture absorbent desiccant packet should be introduced
in the motor enclosure. (Desiccant is not included in the actuator package);
- if the actuators are supplied with standard plastic plugs, remove them from the cable
entries and replace them with weatherproof plugs.
3.2.3 LONG PERIOD STORAGE (MORE THAN ONE YEAR)
3.2.3.1 Indoor storage
In addition to the instructions at point 3.2.2.1):
- if the actuators are supplied with standard plastic plugs, replace them with weatherproof
plugs;
- the coupling parts (i.e. flange, etc.) must be coated with a protective oil or grease;
(if possible, blank off the flange by a protection disk);
- in case the F02 is provided with an alkaline battery, remove it and store it in a dry and
clean place.
3.2.3.2 Outdoor storage
In addition to point 3.2.2.2):
- if the actuators are supplied with standard plastic plugs, replace them with weatherproof
(metal) plugs;
- the coupling parts (i.e. flange, etc.) must be coated with a protective oil or grease;
(if possible, blank off the flange by a protection disk);
- check the actuator general conditions, paying particular attention to the terminal board;
- in case the F02 is provided with an alkaline battery, remove it and store it in a dry and
clean place.

BIFFI F02 Specifications

General

Brand	BIFFI
Model	F02
Category	Controller
Language	English