EasyManua.ls Logo

Bilancial BTEK DD 700 - On Request with Address; Customised String; Checkweight String (**)

Bilancial BTEK DD 700
91 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
ADVANCED USE MANUAL DD700
2.2.6 On request with address
By selecting this option cyclical string transmission is disabled.
Remote commands are used followed by the terminal identification number.
2.2.7 Customised string
It is possible to customise the composition of the string directly from the terminal or using the
"Dialogic" program.
In the latter case, contact the Manufacturer for information.
2.2.8 Checkweight string (**)
The “Verifica Peso” (checkweight) string can only be selected in Verifica Peso/(checkweight) mode,
and can have a length varying between 18 and 21 characters.
This variation depends on:
the unit of measurement used to express the weight: if it is expressed with g or t, the unit of
measurement in the string only occupies one character, if it is expressed in kg, oz or lb the unit
of measurement occupies two characters;
type of protocol: if it is cyclical, there is a weight qualification character (unstable, overload, valid
and stable).
For simplicity, only the example of the checkweight string comprised of 21 characters is provided
below, where the weight is expressed in kg, oz or lb and the protocol is cyclical.

Table of Contents