ADVANCED USE MANUAL DD700
1 PREMISE FOR THE ADVANCED USER MANUAL
This manual is dedicated to customising the terminal to adapt it to the weighing system that it is part
of. It also contains descriptions of software controls to interface with
PCs, PCLs and hosts in general.
Customisation does not affect the weighing functions in any way, however, if not implemented
correctly they can jeopardise operation of the entire system. Only use qualified and expert
technicians to modify the functions described in this section.
1.1 Legend
The following manual applies to operations present in different models defined at time of purchase.
Below the notation in this manual.
Model "1" operation: Single weighing, Sum weighing, Double
weighing, Loading extraction, Unloading extraction and double
weighing.
Model “2” operation: standard, Sum weighing, piece counter,
manual selector, Weighing check and Multi operator.
Model "3" model see "1" with selection management scale "A" or
"B" to the exclusion.
If you do not specify anything, it means present in all models.
To Next Page
Loading...