Bilancial BTEK DD 700 - Pfister String (*)(***); Sasco String (*)(***); Weightronic String (*)(***); NTEP; Btek (*)(***)

19
ADVANCED USE MANUAL DD700
2.2.12 Pfister String (*)(***)
2.2.13 Sasco String (*)(***)
2.2.14 Weightronic String (*)(***)
2.2.15 NTEP/ Btek (*)(***)
The string is only present if NTEP terminal.
The transmission to PC can occur in a cyclic manner or at the end of each weighing operation. The
structure of the strings is:
ST
X
Polarity
weight
UM
Type weight
status
CR
LF
1
1
7
1
1
1
1
1
where:
STX : character 02 hexadecimal.
Polarity : 1 character indicating, "less"(2DH) negative weight, “space”(20H) positive weight
weight : 7 digits of weight, with any "spaces" (20H) in the head
unit of measure:1 character “K"(If selected kg)," L "(if selected lb)
type weight : 1 character “G” (If selected gross),”N”( If selected net)
status : 1 character that identifies the “I”(49H) invalid weight, ”O”(4FH) overload, ”M”(4DH)
weight is not stable and “space”(20H) stable weight
CR : character 0D hexadecimal.
LF : character 0A hexadecimal.