Bilancial BTEK DD 700 - Setup Menu;Customisation;Operating Modes

57
ADVANCED USE MANUAL DD700
3.6.8 Setup Menu/Customisation/Operating modes
PARAMETERS COUNTRY
Terminal Language
Italiano, English, Français, Deutsch, Español, Portugues
This is the language used during normal operation (it can differ
from the menu display language)
Decimal Separator
Point, Comma
Gross weight display
B, G
Letter used to report the gross weight on the display, in
transmission and on print.
B= bruto
G = gross
Date-time format
USA, Europe (**)
Display, print and transmission format of date-time data.
USA
Month Day Year
Hours Minutes AM/PM
Europe
Day Month Year
Hours Minutes Seconds
WEIGHING
Progressive Increment
NO, YES, INPUT ONLY, OUTPUT ONLY (OPTIONAL)
1) NO: the progressive number is never
increased or printed
regardless of the current type of
operation.
1) YES: the progressive number is always
increased or printed
regardless of the current type of
operation
2) INPUT ONLY (OPTIONAL): the progressive number
is only increased and printed after input operations (double
weighing operation).
3) OUTPUT ONLY (OPTIONAL): the progressive number
is only increased and printed after output operations (double
weighing operation including preset weights). With output
operations where printing the input data is repeated, the
progressive number is only printed if printing and increment
are enabled in the relative input operation.