Binder FP 53 - Page 53

FP (E1.1) 07/2017 page 53/90
Hit key
Display 1 shows
60.0
C
(actual temperature set-point)
Display 2 shows
alternating
S02: TEMP 60.0
(variable: temperature in °C)
CONTINUE X/W
(information: go on with X/W)
Entry of temperature set-point of 60 in °C of
S02 with arrow keys
Hit key
Display 1 shows
000
(actual section length set-point)
Display 2 shows
alternating
S02: TIME 000:01
(variable: section length in hhh:mm)
CONTINUE X/W
(information: go on with X/W)
Enter section length set-
point of S02 of
1 min with arrow keys
Value is displayed in both displays.
Hit several times key
until P01: --- SEC appears:
Display 1 shows
03
section S03 has been selected
Display 2 shows
alternating
P01: --- SEC.
enter new set-points for the individual variables with button
X/W.
CONTINUE X/W
or
NEW SEC. X/W
Select section S03with arrow keys
Hit key
Display 1 shows
30
C
(actual temperature set-point)
Display 2 shows
alternating
S03:TEMP 30
(variable: temperature in °C)
CONTINUE X/W
(information: go on with X/W)
Entry of temperature set-point of 30 °C of
S03 with arrow keys
Hit key
Display 1 shows
047
(actual section length set-point)
Display 2 shows
alternating
S03: TIME 047:59
(variable: section length in hhh:mm)
CONTINUE X/W
(information: go on with X/W)
Enter section length set-
point of S03 of
47 hs. 59 min. with arrow keys
Value is displayed in both displays.
Hit several times key
until P01: --- SEC appears:
Display 1 shows
04
section S04 has been selected
Display 2 shows
alternating
P01: --- SEC.
enter new set-points for the individual variables with button
X/W.
CONTINUE X/W
or
NEW SEC. X/W
Select section S04 with arrow keys