Biostar M6TSU User Manual

Contents
iv
3.3.5 Add/Remove Spare Disk...............................................................3-21
3.3.6 Synchronize/Validate/Verify Mirror Array ...................................3-22
3.3.7 Create Span Array.........................................................................3-24
3.3.8 Create 0+1 Array (For Performance & Data Protection)...............3-25
3.3.9 Remove Disk Array.......................................................................3-28
3.3.10 Set Transfer Mode.......................................................................3-29
3.3.11 Device Status...............................................................................3-30
3.3.12 Hot-swapping Hard Disks of Mirror Array .................................3-31
3.3.13 Event Log....................................................................................3-32
3.4 BIOS Configuration..............................................................................3-33
3.4.1 Enter into BIOS Configuration Utility ..........................................3-33
3.4.2 Create RAID..................................................................................3-34
3.4.3 Delete RAID..................................................................................3-35
3.4.4 Rebuild Mirror Array ....................................................................3-35
3.4.5 Add Spare Disk .............................................................................3-36
3.4.6 Remove Spare Disk.......................................................................3-36
3.4.7 Set Disk Mode...............................................................................3-36
3.4.8 Set Boot Disk. ...............................................................................3-37
4. Trouble Shooting ....................................................................4-1

Biostar M6TSU Specifications

General

Brand	Biostar
Model	M6TSU
Category	Motherboard
Language	English