Chapter 3 Trouble Shooting
3-7
restarted, press F6 key when the message Setup is inspecting your
computer’s hardware configuration appears.
2. Press S key to specify additional devices when the Windows 2000
Setup window appears.
3. In the follow-on window of device type, please select Other and press
Enter to continue.
4. Insert the floppy disk of driver, then press Enter to continue.
5. The system will ask whether to install driver under WinNT or under
Windows 2000, please select to install driver under Windows 2000.
6. The follow-on interface will list the devices to be installed, in which
HPT370 UDMA/ATA100 RAID Controller item should be included.( If
users want to install other devices, please operate at this time. If all devices
have been successfully installed, please go to next.)
7. Press Enter to continue Windows 2000 setup.
To Next Page
Loading...
Need help?
General
