Biotech TLM-Pro - Effective Chimney Height; Chimney Draught Regulator

7
PLANING FOLDER PELLET BOILER
The eective height is the flue length between the flue gas inlet
into the flue and the flue mouth.The flue must be adapted to the
local, legal regulations! Low-emission operation according to the
quality seal is only guaranteed if the system can be operated with
the low flue gas temperatures of the smallest heat output (30% of
the nominal load). This usually requires an acid-proof chimney.
3.1 EFFECTIVE HEIGHT
ATTENTION:
If the chimney draught regulator is installed
directly in the flue pipe, contrary to the
location suggested below, due to the situation
on site, an increased dust load in the boiler
room must be expected - PLEASE take this
into account when planning!