Specifications
106
Max. crest factor: 3.0 at full scale
(1)
Specifications are for sine wave inputs >5% of the range
Maximum Input and Overload Current Protection: 2A/ 250V fuse.
Resistance (2-Wire and 4-Wire)
Accuracy ± (% of reading + % of range), 23°C ±5°C
1.20000 kΩ
12.0000 kΩ
120.000 kΩ
1.20000 MΩ
12.0000 MΩ
120.000 MΩ
10 mΩ
100 mΩ
1 Ω
10 Ω
100 Ω
1 kΩ
1.19999
11.9999
119.999
1.19999
11.9999
119.999
1 mA
100 μA
10 μA
10 μA
7.0/(10M+Rx) μA
7.0/(10M+Rx) μA
0.03 +0.004
(2)
0.03 +0.004
(2)
0.03 +0.004
0.03 +0.004
0.10 +0.004
0.50 +0.008
1.20000 kΩ
12.0000 kΩ
120.000 kΩ
1.20000 MΩ
12.0000 MΩ
120.000 MΩ
10 mΩ
100 mΩ
1 Ω
10 Ω
100 Ω
1 kΩ
1.19999
11.9999
119.999
1.19999
11.9999
119.999
1 mA
100 μA
10 μA
10 μA
7.0/(10M+Rx) μA
7.0/(10M+Rx) μA
0.03 +0.008
(2)
0.03 +0.008
(2)
0.03 +0.008
0.03 +0.008
0.10 +0.008
0.50 +0.015
1.20000 kΩ
12.0000 kΩ
120.000 kΩ
1.20000 MΩ
12.0000 MΩ
120.000 MΩ
10 mΩ
100 mΩ
1 Ω
10 Ω
100 Ω
1 kΩ
10 kΩ
1.1999
11.999
119.99
1.1999
11.999
119.99
1 mA
100 μA
10 μA
10 μA
7.0/(10M+Rx) μA
7.0/(10M+Rx) μA
0.05 +0.02
(2)
0.03 +0.02
(2)
0.03 +0.02
(2)
0.03 +0.02
0.05 +0.02
0.10 +0.02
0.50 +0.02
(1)
In order to eliminate the noise interference, which might be induced to the test leads, it is
recommended to use a shielded test cable for measuring resistance above 120 kΩ.
(2)
Using REL function
Note: Rx is the measured resistance value.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com