BK Precision 5492B - Page 82

SCPI Command Reference
82
Table 6-4 SENSe Command Summary (cont.)
Command
Function description
Default
:FRESistance
:NPLCycles <n>
:NPLCycles?
:RANGe
[:UPPer] <n〉
[:UPPer]?
:AUTO <b>
:AUTO?
:REFerence <n>
:STATe <b>
:STATe?
:ACQuire
:REFerence?
:AVERage
:TCONtrol <name>
:TCONtrol?
:COUNt <n>
:COUNt?
:STATe <b>
:STATe?
Path to configure 4-wire resistance
Set integration rate (line cycle: 0.1 to 10)
Query line cycle integration rate
Path to configure measurement range
Select range
Query range
Enable or disable auto range
Query auto range
Specify reference (0 to 1201e6)
Enable or disable reference
Query state of reference
Use input signal as reference
Query reference value
Path to configure and control filter
Select filter type (MOVing, REPeat)
Query filter type
Specify filter count (1 to 100)
Query filter count
Enable or disable filter
Query state of digital filter
1
100e6
ON
0
OFF
5
OFF
:FREQuency
:THReshold
:VOLTage
:RANGe <n>
:RANGe?
:REFerence <n>
:STATe <b>
:STATe?
:ACQuire
:REFerence?
Path to configure frequency
Path to select the threshold voltage range:
Select threshold range
Query threshold range
Specify reference (0 to 1.5e7)
Enable or disable reference
Query state of reference
Use input signal as reference
Query reference value
10
0
OFF
:PERiod
:THReshold
:VOLTage
:RANGe <n>
:RANGe?
:REFerence <n>
:STATe <b>
:STATe?
:ACQuire
:REFerence?
Path to configure period
Path to select the threshold voltage range:
Select threshold range
Query threshold range
Specify reference (0 to 1)
Enable or disable reference
Query state of reference
Use input signal as reference
Query reference value
10
0
OFF
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com