BK Precision 9130B

15
Self-test Errors
The following errors will be displayed if the self-test did not complete successfully:
Error Message on Display
Description
EEPROM Fail
The internal EEPROM is corrupted or damaged.
System Lost
Last system settings within the EEPROM are lost.
Model Fail
Channel response failure.
Cal Lost
Calibration data within the EEPROM is lost.
Fact Loss
Factory calibration data is lost.
Model Lost
Channel initialization failed.
If any of these errors occur, please contact B&K Precision.
www.GlobalTestSupply.com
Quality BK Precision Products Online at: sales@GlobalTestSupply.com